LAPS Lidar Measurements at the ARM Alaska Northslope Site (Support to FIRE Project)
Document ID: 296
Philbrick, C. Russell1
Lysak, Jr., Daniel B.1
Petach, Thomas M.1
Esposito, Steven T.1
Mulik, Karoline R.1
1 The Pennsylvania State University, Applied Research Laboratory, University Park, PA, U.S.A.
Abstract
This report consists of data summaries of the results obtained during the May 1998 measurement period at Barrow Alaska. This report does not contain any data interpretation or analysis of the results which will follow this activity. This report is forwarded with a data set on magnetic media which contains the reduced data from the LAPS lidar in 15 minute intervals. The data was obtained during the period 15-30 May 1998. The measurement period overlapped with several aircraft flights conducted by NASA as part of the FIRE project. The report contains a summary list of the data obtained plus figures that have been prepared to help visualize the measurement periods. The order of the presentation is as follows: Section 1. A copy of the Statement of Work for the planned activity of the second measurement period at the ARM Northslope site is provided. Section 2. A list of the data collection periods shows the number of one minute data records stored during each hour of operation and the corresponding size (Mbytes) of the one hour data folders. The folder and file names are composed from the year, month, day, hour and minute. The date/time information is given in UTC for easier comparison with other data sets. Section 3. A set of 4 comparisons between the LAPS lidar results and the sondes released by the ARM scientists from a location nearby the lidar. The lidar results show the +/- 1 sigma statistical error on each of the independent 75 m altitude bins of the data. This set of 4 comparisons was used to set and validate the calibration value which was then used for the complete data set. Section 4. A set of false color figures with up to 10 hours of specific humidity measurements are shown in each graph. Two days of measurements are shown on each page. These plots are crude representations of the data and permit a survey which indicates when the clouds were very low or where interesting events may occur in the results. These plots are prepared using the real time sequence plot program which has no smoothing in either the altitude or time (except that you are allowed to pick the integration time and time step. All of these plots were prepared with 15 minute integration and 5 minute time step. Section 5. A set of time sequence data for all of the extended observation periods are shown with a smoothing algorithm from the Matlab plotting library. Most of these data are integrated for 5 minutes and stepped at I minute intervals but several plots are shown with both 15 minute integration and 5 minute steps. The upper level on these data was selected and converted to the white background where the error in the specific humidity reached 25%. Section 6. The set of one hour integrated plots shown with up to 4 hours per page are provided- from the real time analysis snapshot program. The only difference in these plots and the real time display is that the plots are stopped at an altitude where the error appears to be too large for the data to contain any meaningful information.
Keywords: data acquisition, data reduction, optical radar, radar measurement, humidity measurement, Alaska, algorithms, calabrating, errors, libaries, plotting, position(location), real time operation, surveys
| Citation: | "LAPS Lidar Measurements at the ARM Alaska Northslope Site (Support to FIRE Project)", Philbrick, C. R., D. B. Lysak, Jr., T. M. Petach, S. T. Esposito, K. R. Mulik, Technical Report, NASA, September 1998, pp. 1 - 75, Document ID: 19990005998, Grant: NAG1-2074 |